Powerful magnets Due to their super magnetism and cost-effectiveness, many works have begun to use magnetic force to solve some of the structures and functions in products. Strong magnets have strong magnetic properties, so how is it easier to separate magnets? First of all, you can't pull it apart with brute force, you must take the method of pushing and translation, so that the magnets are simply separated. Therefore, when separating the magnets, use skill to translate the magnets. Strong magnets have strong magnetic properties, and the material is relatively brittle. If they suddenly collide with each other during use, the magnets will simply break. This is a non-product quality problem due to the particularity of the material. When using the magnet, we should avoid the magnet from colliding suddenly.
1. The strong magnet must ensure that the workplace is clean during use, so that it will not simply adsorb small magnetic particles such as iron filings and affect the use. And the characteristic of the NdFeB raw material is that it is hard and brittle. If it sucks together, it can reach more than 600 times its own weight, which is very easy to absorb and damage. At the same time, in the process of operation, it is necessary to pay great attention to the small specifications to avoid bumps and damage, and about the large specifications, then you must pay attention to personal safety and protection.
2. When storing the strong magnet, you must pay attention to keeping the room ventilated and dry, otherwise, if it is a humid environment, it is particularly simple to cause the magnet to corrode. Together at the ambient temperature do not exceed the maximum working temperature of the magnet. Other non-plated products are recommended to be properly oiled and rust-proof during storage, and magnetized products must be stored properly away from magnetic disks, magnetic cards, magnetic tapes, computer monitors, watches and other objects with relatively magnetic fields. In addition, because the raw material of the magnet is brittle, it must be ensured that the magnet does not receive violent impact during the installation process of transportation, electroplating (coating). Strong magnets should be shielded when they are magnetized, especially when they are transported by air.